How to find conflicting viewpoints in physics - ACT Science
Card 0 of 20
The graph below depicts the position of three different cars over a 15-second time interval.
Two students have conflicting views on determining which, if any, cars are accelerating. Which is the best method of determining which car is accelerating?
The graph below depicts the position of three different cars over a 15-second time interval.
Two students have conflicting views on determining which, if any, cars are accelerating. Which is the best method of determining which car is accelerating?
A position vs. velocity graph would help show if any cars have increasing or decreasing velocities, which, by definition, is acceleration or deacceleration, respectively. A car traveling at a constant speed is not accelerating. Where cars cross position zero is not relevant for the question stem. Any car with a slope not equal to zero tells us that the car is moving or has a speed, it does not, however, tell us whether the car is accelerating or not. Visually, an accelerating car would have a position that changes in the same direction by greater and greater amounts over the same timer interval, as in the case of car 3 over time 4s to 9s.
A position vs. velocity graph would help show if any cars have increasing or decreasing velocities, which, by definition, is acceleration or deacceleration, respectively. A car traveling at a constant speed is not accelerating. Where cars cross position zero is not relevant for the question stem. Any car with a slope not equal to zero tells us that the car is moving or has a speed, it does not, however, tell us whether the car is accelerating or not. Visually, an accelerating car would have a position that changes in the same direction by greater and greater amounts over the same timer interval, as in the case of car 3 over time 4s to 9s.
Compare your answer with the correct one above
Sound waves travel through a medium by mechanically disturbing the particles of that medium. As particles in the medium are displaced by the sound wave, they in turn act upon neighboring particles. In this fashion, the wave travels through the medium through a parallel series of disturbed particles. Like in other forms of motion, the rate at which the sound wave travels can be measured by dividing the distance over which the wave travels by the time required for it to do so.
Study 1
A group of students hypothesizes that the velocity of sound is dependent upon the density of the medium through which it passes. They propose that with more matter in a given space, each particle needs to travel a shorter distance to disturb the adjacent particles. Using two microphones and a high speed recording device, the students measured the delay from the first microphone to the second. They chose a variety of media, shown in Table 1, and measured the velocity of sound through each using their two-microphone setup. The results are found in Table 1.
Study 2
The students wanted to test their hypothesis by using the same medium at different densities. To do this, they heated pure water to various temperatures and repeated the procedure described in Study 1. Their results can be found in Table 2.
Suppose a second group of students hypothesizes that the velocity of sound is inversely dependent upon the density of the substance through which the sound travels. Which study would best support their hypothesis and why?
Sound waves travel through a medium by mechanically disturbing the particles of that medium. As particles in the medium are displaced by the sound wave, they in turn act upon neighboring particles. In this fashion, the wave travels through the medium through a parallel series of disturbed particles. Like in other forms of motion, the rate at which the sound wave travels can be measured by dividing the distance over which the wave travels by the time required for it to do so.
Study 1
A group of students hypothesizes that the velocity of sound is dependent upon the density of the medium through which it passes. They propose that with more matter in a given space, each particle needs to travel a shorter distance to disturb the adjacent particles. Using two microphones and a high speed recording device, the students measured the delay from the first microphone to the second. They chose a variety of media, shown in Table 1, and measured the velocity of sound through each using their two-microphone setup. The results are found in Table 1.
Study 2
The students wanted to test their hypothesis by using the same medium at different densities. To do this, they heated pure water to various temperatures and repeated the procedure described in Study 1. Their results can be found in Table 2.
Suppose a second group of students hypothesizes that the velocity of sound is inversely dependent upon the density of the substance through which the sound travels. Which study would best support their hypothesis and why?
In order for velocity to be inversely dependent upon density, one must increase as the other decreases. This is most consistent with the results of Study 2.
In order for velocity to be inversely dependent upon density, one must increase as the other decreases. This is most consistent with the results of Study 2.
Compare your answer with the correct one above
Sound waves travel through a medium by mechanically disturbing the particles of that medium. As particles in the medium are displaced by the sound wave, they in turn act upon neighboring particles. In this fashion, the wave travels through the medium through a parallel series of disturbed particles. Like in other forms of motion, the rate at which the sound wave travels can be measured by dividing the distance over which the wave travels by the time required for it to do so.
Study 1
A group of students hypothesizes that the velocity of sound is dependent upon the density of the medium through which it passes. They propose that with more matter in a given space, each particle needs to travel a shorter distance to disturb the adjacent particles. Using two microphones and a high speed recording device, the students measured the delay from the first microphone to the second. They chose a variety of media, shown in Table 1, and measured the velocity of sound through each using their two-microphone setup. The results are found in Table 1.
Study 2
The students wanted to test their hypothesis by using the same medium at different densities. To do this, they heated pure water to various temperatures and repeated the procedure described in Study 1. Their results can be found in Table 2.
If the students' hypotheses were correct, what might be a worthwhile question for them to study next?
Sound waves travel through a medium by mechanically disturbing the particles of that medium. As particles in the medium are displaced by the sound wave, they in turn act upon neighboring particles. In this fashion, the wave travels through the medium through a parallel series of disturbed particles. Like in other forms of motion, the rate at which the sound wave travels can be measured by dividing the distance over which the wave travels by the time required for it to do so.
Study 1
A group of students hypothesizes that the velocity of sound is dependent upon the density of the medium through which it passes. They propose that with more matter in a given space, each particle needs to travel a shorter distance to disturb the adjacent particles. Using two microphones and a high speed recording device, the students measured the delay from the first microphone to the second. They chose a variety of media, shown in Table 1, and measured the velocity of sound through each using their two-microphone setup. The results are found in Table 1.
Study 2
The students wanted to test their hypothesis by using the same medium at different densities. To do this, they heated pure water to various temperatures and repeated the procedure described in Study 1. Their results can be found in Table 2.
If the students' hypotheses were correct, what might be a worthwhile question for them to study next?
If the velocity of sound through a substance is directly dependent upon the density of the substance, then that would mean increasing density should always result in increasing velocity. Because this is not the case (see "lead" in Table 1 and the increasing velocities as density decreases in Table 2), there must be another factor or multiple factors affecting the velocity of sound as it travels through a substance.
The students' correct hypotheses would account for the remaining answer choices, so these would require no further investigation.
If the velocity of sound through a substance is directly dependent upon the density of the substance, then that would mean increasing density should always result in increasing velocity. Because this is not the case (see "lead" in Table 1 and the increasing velocities as density decreases in Table 2), there must be another factor or multiple factors affecting the velocity of sound as it travels through a substance.
The students' correct hypotheses would account for the remaining answer choices, so these would require no further investigation.
Compare your answer with the correct one above
A physicist wishes to study the trajectory of a ball launched horizontally. She varies parameters such as the launching velocity, starting height, and mass of the ball. For each trajectory, she records the time of flight (in seconds) and horizontal displacement (in meters). She assumes air resistance is negligible.
Figure 1
Using all of the data she collects, she constructs the following table:
Table 1
A physics student conducted a similar experiment and concluded that the time of flight for a horizontally launched ball was inversely related to the starting height. Is his conclusion consistent with the results of Trial 2?
A physicist wishes to study the trajectory of a ball launched horizontally. She varies parameters such as the launching velocity, starting height, and mass of the ball. For each trajectory, she records the time of flight (in seconds) and horizontal displacement (in meters). She assumes air resistance is negligible.
Figure 1
Using all of the data she collects, she constructs the following table:
Table 1
A physics student conducted a similar experiment and concluded that the time of flight for a horizontally launched ball was inversely related to the starting height. Is his conclusion consistent with the results of Trial 2?
Trial 2 shows that time of flight increases with increasing starting height. Therefore, the two are not inversely related and the student's conclusion was incorrect.
Trial 2 shows that time of flight increases with increasing starting height. Therefore, the two are not inversely related and the student's conclusion was incorrect.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
In an experiment, an iron bar that showed no magnetism was heated and allowed to cool while aligned North-South with the Earth's magnetic field. After it cooled, the iron bar was found to be magnetic. Scientist 1 would most likely explain this result by saying which of the following?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
In an experiment, an iron bar that showed no magnetism was heated and allowed to cool while aligned North-South with the Earth's magnetic field. After it cooled, the iron bar was found to be magnetic. Scientist 1 would most likely explain this result by saying which of the following?
Scientist 1 states that magnetism occurs when the magnetic domains in a material align. Since the iron bar initially showed no magnetism, we can assume that its magnetic domains were initially oriented randomly, and that it had no magnetic poles. Since the iron bar became magnetic after it was heated and cooled, the heating and cooling process likely reoriented the magnetic domains in the iron so that they became more aligned, creating two magnetic poles.
Scientist 1 states that magnetism occurs when the magnetic domains in a material align. Since the iron bar initially showed no magnetism, we can assume that its magnetic domains were initially oriented randomly, and that it had no magnetic poles. Since the iron bar became magnetic after it was heated and cooled, the heating and cooling process likely reoriented the magnetic domains in the iron so that they became more aligned, creating two magnetic poles.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
When two wires carrying electric currents are placed near each other, it is found that each of the wires exerts a slight attraction on the other. Scientist 3 would most likely explain this by saying which of the following?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
When two wires carrying electric currents are placed near each other, it is found that each of the wires exerts a slight attraction on the other. Scientist 3 would most likely explain this by saying which of the following?
In the first paragraph of her explanation, Scientist 3 states that an electric current can induce a magnetic field around it. So, when there are two wires carrying electric currents, she will assume that both of the wires produce a magnetic field. Since the two wires are attracted to each other, the magnetic fields likely also attract each other. Finally, Scientist 3 also states that the magnetic field produced by an electric current exists perpendicular to the current's direction of flow. So, the magnetic fields are oriented perpendicular to the wires that produce them.
In the first paragraph of her explanation, Scientist 3 states that an electric current can induce a magnetic field around it. So, when there are two wires carrying electric currents, she will assume that both of the wires produce a magnetic field. Since the two wires are attracted to each other, the magnetic fields likely also attract each other. Finally, Scientist 3 also states that the magnetic field produced by an electric current exists perpendicular to the current's direction of flow. So, the magnetic fields are oriented perpendicular to the wires that produce them.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
In a compass, a needle spins to align North-South, following the Earth's magnetic field. Suppose that a compass is placed near wire through which an electric current flows, and it is observed that the needle of the compass no longer aligns to North-South. How would this affect the arguments of Scientist 2 and Scientist 3?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
In a compass, a needle spins to align North-South, following the Earth's magnetic field. Suppose that a compass is placed near wire through which an electric current flows, and it is observed that the needle of the compass no longer aligns to North-South. How would this affect the arguments of Scientist 2 and Scientist 3?
Here, since the (magnetic) compass no longer aligns to North-South when it is near the wire, this implies that there is some kind of magnetic field near the wire which is interfering with the compass. This supports what Scientist 3 says in the first paragraph of her explanation: that an electric current can induce a magnetic field around it.
Scientist 2, however, makes no mention of this kind of electromagnetic induction in his explanation; however, he also does not say that it is not possible. His explanation is mostly about how magnetic poles are similar to and different from static electric charges. So, his argument is not affected by the observation that an electric current induces a magnetic field.
Here, since the (magnetic) compass no longer aligns to North-South when it is near the wire, this implies that there is some kind of magnetic field near the wire which is interfering with the compass. This supports what Scientist 3 says in the first paragraph of her explanation: that an electric current can induce a magnetic field around it.
Scientist 2, however, makes no mention of this kind of electromagnetic induction in his explanation; however, he also does not say that it is not possible. His explanation is mostly about how magnetic poles are similar to and different from static electric charges. So, his argument is not affected by the observation that an electric current induces a magnetic field.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Given that all of the following are true, which of the following, if found, provides the strongest evidence against Scientist 1's hypothesis?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Given that all of the following are true, which of the following, if found, provides the strongest evidence against Scientist 1's hypothesis?
Scientist 1 states that electricity and magnetism are completely separate phenomena; however, if a wire carrying an electric current exerts an attractive force on one pole of a magnet and a repulsive force on the other pole of the magnet, there must be an interaction between the electricity flowing through the wire and the magnet. Specifically, it seems like the electricity flowing through the wire is creating its own magnetic field, which attracts one pole of the magnet and repels the other pole.
Scientist 1 states that electricity and magnetism are completely separate phenomena; however, if a wire carrying an electric current exerts an attractive force on one pole of a magnet and a repulsive force on the other pole of the magnet, there must be an interaction between the electricity flowing through the wire and the magnet. Specifically, it seems like the electricity flowing through the wire is creating its own magnetic field, which attracts one pole of the magnet and repels the other pole.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
According to Scientist 2, which of the following would be an example of a static electric charge?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
According to Scientist 2, which of the following would be an example of a static electric charge?
Scientist 2 states that static electric charges occur when an object has a net excess of positive or negative charge. According to Scientist 2, static electric charges also don't involve a moving charge. So, one example of a static electric charge is a balloon that has picked up excess electrons: it has an excess of negative charge, but the charge is not moving.
Scientist 2 states that static electric charges occur when an object has a net excess of positive or negative charge. According to Scientist 2, static electric charges also don't involve a moving charge. So, one example of a static electric charge is a balloon that has picked up excess electrons: it has an excess of negative charge, but the charge is not moving.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
When a wire coil is rotated between the poles of a magnet, an electric current is produced in the wire. How does this observation affect the argument of Scientist 3?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
When a wire coil is rotated between the poles of a magnet, an electric current is produced in the wire. How does this observation affect the argument of Scientist 3?
In the second paragraph of her explanation, Scientist 3 states that a magnetic field can induce an electric current. Specifically, she says that moving a wire across a magnetic field can induce a current in the wire. This idea is supported by the observation that rotating (moving) a wire coil between the poles of a magnet (in a magnetic field) induces an electric current.
In the second paragraph of her explanation, Scientist 3 states that a magnetic field can induce an electric current. Specifically, she says that moving a wire across a magnetic field can induce a current in the wire. This idea is supported by the observation that rotating (moving) a wire coil between the poles of a magnet (in a magnetic field) induces an electric current.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Which of the following would be an example of electricity according to Scientist 2, but not according to Scientist 1?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Which of the following would be an example of electricity according to Scientist 2, but not according to Scientist 1?
According to Scientist 2, electricity can take on two forms: static electricity and current electricity. Scientist 2 states that while current electricity consists of a moving electric charge, static electricity involves no moving charge. Scientist 2 also states that static electricity can cause two objects to repel or attract each other. In contrast, Scientist 1 defines electricity as a moving charge—he states that electricity must involve the flow of electrons.
So, a situation where there is no flow of electrons—where two objects repel each other due to static electricity—would be seen as an example of electricity by Scientist 2, but not by Scientist 1.
According to Scientist 2, electricity can take on two forms: static electricity and current electricity. Scientist 2 states that while current electricity consists of a moving electric charge, static electricity involves no moving charge. Scientist 2 also states that static electricity can cause two objects to repel or attract each other. In contrast, Scientist 1 defines electricity as a moving charge—he states that electricity must involve the flow of electrons.
So, a situation where there is no flow of electrons—where two objects repel each other due to static electricity—would be seen as an example of electricity by Scientist 2, but not by Scientist 1.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Which of the following describes a difference between the explanations of Scientist 1 and Scientist 2?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Which of the following describes a difference between the explanations of Scientist 1 and Scientist 2?
In his explanation, Scientist 1 describes electricity as a moving electric charge caused by the flow of electrons. In contrast, Scientist 2 distinguishes between two forms of electricity: current electricity and static electricity. According to Scientist 2, current electricity is a moving electric charge, while static electricity occurs when objects accumulate net excesses of positive or negative charge.
In his explanation, Scientist 1 describes electricity as a moving electric charge caused by the flow of electrons. In contrast, Scientist 2 distinguishes between two forms of electricity: current electricity and static electricity. According to Scientist 2, current electricity is a moving electric charge, while static electricity occurs when objects accumulate net excesses of positive or negative charge.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
An iron magnet is hit repeatedly with a hammer. Afterwards, when the iron magnet is examined, it is found to be much less magnetic than it was before. What explanation would Scientist 1 most likely provide for this?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
An iron magnet is hit repeatedly with a hammer. Afterwards, when the iron magnet is examined, it is found to be much less magnetic than it was before. What explanation would Scientist 1 most likely provide for this?
Scientist 1 states that magnetism is caused by the alignment of magnetic domains in a material. So, according to Scientist 1's explanation, the domains of the iron magnet were aligned before it was hit with the hammer.
Scientist 1 also says that in non-magnets, the magnetic domains are oriented randomly. So, we can assume that hitting the iron magnet with the hammer caused the magnetic domains to be knocked out of alignment and become oriented more randomly. This made the magnet less magnetic.
Scientist 1 states that magnetism is caused by the alignment of magnetic domains in a material. So, according to Scientist 1's explanation, the domains of the iron magnet were aligned before it was hit with the hammer.
Scientist 1 also says that in non-magnets, the magnetic domains are oriented randomly. So, we can assume that hitting the iron magnet with the hammer caused the magnetic domains to be knocked out of alignment and become oriented more randomly. This made the magnet less magnetic.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Electric current is measured in amperes (A). According to Scientist 1 and the information in the passage, in which of the following situations would one measure the greatest amplitude for an electric field?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Electric current is measured in amperes (A). According to Scientist 1 and the information in the passage, in which of the following situations would one measure the greatest amplitude for an electric field?
The introductory information states that an electric field is produced by an electric charge, and that the strength of the electric field is inversely proportional to the square of the distance from the charge. (This means, for example, that the electric field 10 cm away from a charge is 100 times weaker than the field 1 cm away from the charge.) Scientist 1 gives us additional information—he tells us that a moving electric charge can be measured as current.
So, the electric field will have its greatest magnitude when it is measured close (1 cm) to a wire carrying a charge, and when the flow of charge–the current–in the wire is greater (10 A).
The introductory information states that an electric field is produced by an electric charge, and that the strength of the electric field is inversely proportional to the square of the distance from the charge. (This means, for example, that the electric field 10 cm away from a charge is 100 times weaker than the field 1 cm away from the charge.) Scientist 1 gives us additional information—he tells us that a moving electric charge can be measured as current.
So, the electric field will have its greatest magnitude when it is measured close (1 cm) to a wire carrying a charge, and when the flow of charge–the current–in the wire is greater (10 A).
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Which of the following questions is not answered in Scientist 3's explanation, but is answered by Scientist 2?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Which of the following questions is not answered in Scientist 3's explanation, but is answered by Scientist 2?
In the first paragraph of Scientist 2's explanation, current electricity is described as the moving form of electricity, while static electricity is described as a form of electricity that occurs when objects have an excess of positive or negative charge. Scientist 3's explanation, however, only mentions current electricity—not static electricity—and does not describe the difference between the two.
In the first paragraph of Scientist 2's explanation, current electricity is described as the moving form of electricity, while static electricity is described as a form of electricity that occurs when objects have an excess of positive or negative charge. Scientist 3's explanation, however, only mentions current electricity—not static electricity—and does not describe the difference between the two.
Compare your answer with the correct one above
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Given that all of the following are true, which of the following, if found, provides the strongest evidence against Scientist 3's hypothesis?
Magnets and electric charges show certain similarities. For example, both magnets and electric charges can exert a force on their surroundings. This force, when produced by a magnet, is called a magnetic field. When it is produced by an electric charge, the force is called an electric field. It has been observed that the strength of both magnetic fields and electric fields is inversely proportional to the square of the distance between a magnet or an electric charge and the objects that they affect.
Below, three scientists debate the relationship between electricity and magnetism.
Scientist 1:
Electricity and magnetism are two different phenomena. Materials such as iron, cobalt, and nickel contain magnetic domains: tiny regions of magnetism, each with two poles. Normally, the domains have a random orientation and are not aligned, so the magnetism of some domains cancels out that of other domains; however, in magnets, domains line up in the same direction, creating the two poles of the magnet and causing magnetic behavior.
In contrast, electricity is a moving electric charge which is caused by the flow of electrons through a material. Electrons flow through a material from a region of higher potential (more negative charge) to a region of lower potential (more positive charge). We can measure this flow of electrons as current, which refers to the amount of charge transferred over a period of time.
Scientist 2:
Electricity and magnetism are similar phenomena; however, one cannot be reduced to the other. Electricity involves two types of charges: positive and negative charge. Though electricity can occur in a moving form (in the form of current, or an electric charge moving through a wire), it can also occur in a static form. Static electricity involves no moving charge. Instead, objects can have a net excess of positive charge or a net excess of negative charge—because of having lost or gained electrons, respectively. When two static positive electric charges or two static negative electric charges are brought close together, they repel each other. However, when a positive and a negative static charge are brought together, they attract each other.
Similarly, all magnets have two poles. Magnetic poles that are alike repel each other, while dissimilar magnetic poles attract each other. Magnets and static electric charges are alike in that they both show attraction and repulsion in similar circumstances. However, while isolated static electric charges occur in nature, there are no single, isolated magnetic poles. All magnets have two poles, which cannot be dissociated from each other.
Scientist 3:
Electricity and magnetism are two aspects of the same phenomenon. A moving flow of electrons creates a magnetic field around it. Thus, wherever an electric current exists, a magnetic field will also exist. The magnetic field created by an electric current is perpendicular to the electric current's direction of flow.
Additionally, a magnetic field can induce an electric current. This can happen when a wire is moved across a magnetic field, or when a magnetic field is moved near a conductive wire. Because magnetic fields can produce electric fields and electric fields can produce magnetic fields, we can understand electricity and magnetism as parts of one phenomenon: electromagnetism.
Given that all of the following are true, which of the following, if found, provides the strongest evidence against Scientist 3's hypothesis?
Scientist 3 argues that an electric current can induce a magnetic field. So, if we have a wire in which an electric current is flowing, we should also expect there to be a magnetic field around the wire. The magnetic field should exert a force—either an attraction or repulsion—on a magnet that is placed in it. If no attraction or repulsion on the magnet is observed, this would suggest that there is not a magnetic field around the wire—contrary to what Scientist 3 says.
Scientist 3 argues that an electric current can induce a magnetic field. So, if we have a wire in which an electric current is flowing, we should also expect there to be a magnetic field around the wire. The magnetic field should exert a force—either an attraction or repulsion—on a magnet that is placed in it. If no attraction or repulsion on the magnet is observed, this would suggest that there is not a magnetic field around the wire—contrary to what Scientist 3 says.
Compare your answer with the correct one above
In a physics class, students conducted a series of experiments by placing different objects into a beaker of water. They conducted twenty trials for each object. For each trial, they recorded whether or not the object floated.
First, they placed a steel paper clip into the water. They observed that the paper clip usually sank; however, they also saw that occasionally, the paper clip stayed afloat if it was placed very gently on top of the water. Next, they repeated the the same procedure using a cork, a toy boat made of aluminum, and a glass marble. They observed that both the cork and the toy boat always stayed afloat in the water, but that the glass marble always sank.
Below, three students give their explanations for these observations.
Student 1:
Objects float when they are less dense than the liquid in which they are immersed. For example, when immiscible liquids of varying densities are mixed together in a container, the most dense liquid will sink to the bottom of the container, while the least dense liquid will rise to the top. This same principle applies to solid objects. Because the cork and the aluminum toy boat always float, cork and the aluminum of the boat must be less dense than water. Because the glass marble always sinks, the glass of the marble must be more dense than water.
Objects that are more dense than water can also float due to surface tension. Surface tension occurs because molecules of a liquid are more attracted to each other more than they are to other objects. Molecules on the surface of water are attracted to the molecules around them and below them. This attraction causes a liquid's surface to behave if it were covered by a thin film, which resists penetration by other objects. Therefore, small objects such as paper clips can sometimes float on water when the upward force of water's surface tension exceeds the force of gravity pulling such objects down. Because the paper clips often sink and only float sometimes, we can conclude that they are indeed more dense than water, and that their floating is due to surface tension.
Student 2:
Objects float in two different cases: when they are buoyed by a liquid's surface tension or when their average density is less than that of the liquid in which they are immersed. The average density of cork is less than that of water. This is why the cork floats. In contrast, the density of glass is more than that of water. This is why the glass marble sinks.
However, the densities of aluminum and of steel are greater than that of water. Thus, density cannot be used to explain why the aluminum toy boat and the paper clip float. Both of these objects float because of surface tension. Because the paper clip does not have much mass, the normal upward force created by water's surface tension can be enough to allow it to float. Other objects with greater mass, like the toy boat, employ a particular shape to magnify the force of surface tension. The curved shape of the boat's bottom both stabilizes the boat and increases the amount of the boat's surface area that touches the water, maximizing the force due to surface tension that the boat receives.
Student 3:
In this experiment, the paper clip floats because of surface tension; however, the cork, toy boat, and marble float or sink because of their relationship to a buoyant force. All objects immersed in a liquid experience a buoyant force, which pushes them upward. The strength of this force is equal to the weight of the liquid displaced, or pushed aside, by an object. Every object also experiences a downward force due to gravity, which is measured as the object's weight, and which is directly proportional to the object's mass. When the buoyant force acting on an object is greater than the downward force due to gravity, the object floats. However, when the buoyant force is less than the force due to gravity, the object sinks. Both the cork and the aluminum toy boat are able to displace enough water to create a buoyant force that exceeds the force due to gravity, so they float. However, the glass marble does not displace enough water to create a sufficient buoyant force, so it sinks.
The density of fresh, newly cut wood is less than water, and fresh wood always floats; however, over time, floating pieces of wood may sink. Which of the following explanations would Student 1 most likely give for this observation?
In a physics class, students conducted a series of experiments by placing different objects into a beaker of water. They conducted twenty trials for each object. For each trial, they recorded whether or not the object floated.
First, they placed a steel paper clip into the water. They observed that the paper clip usually sank; however, they also saw that occasionally, the paper clip stayed afloat if it was placed very gently on top of the water. Next, they repeated the the same procedure using a cork, a toy boat made of aluminum, and a glass marble. They observed that both the cork and the toy boat always stayed afloat in the water, but that the glass marble always sank.
Below, three students give their explanations for these observations.
Student 1:
Objects float when they are less dense than the liquid in which they are immersed. For example, when immiscible liquids of varying densities are mixed together in a container, the most dense liquid will sink to the bottom of the container, while the least dense liquid will rise to the top. This same principle applies to solid objects. Because the cork and the aluminum toy boat always float, cork and the aluminum of the boat must be less dense than water. Because the glass marble always sinks, the glass of the marble must be more dense than water.
Objects that are more dense than water can also float due to surface tension. Surface tension occurs because molecules of a liquid are more attracted to each other more than they are to other objects. Molecules on the surface of water are attracted to the molecules around them and below them. This attraction causes a liquid's surface to behave if it were covered by a thin film, which resists penetration by other objects. Therefore, small objects such as paper clips can sometimes float on water when the upward force of water's surface tension exceeds the force of gravity pulling such objects down. Because the paper clips often sink and only float sometimes, we can conclude that they are indeed more dense than water, and that their floating is due to surface tension.
Student 2:
Objects float in two different cases: when they are buoyed by a liquid's surface tension or when their average density is less than that of the liquid in which they are immersed. The average density of cork is less than that of water. This is why the cork floats. In contrast, the density of glass is more than that of water. This is why the glass marble sinks.
However, the densities of aluminum and of steel are greater than that of water. Thus, density cannot be used to explain why the aluminum toy boat and the paper clip float. Both of these objects float because of surface tension. Because the paper clip does not have much mass, the normal upward force created by water's surface tension can be enough to allow it to float. Other objects with greater mass, like the toy boat, employ a particular shape to magnify the force of surface tension. The curved shape of the boat's bottom both stabilizes the boat and increases the amount of the boat's surface area that touches the water, maximizing the force due to surface tension that the boat receives.
Student 3:
In this experiment, the paper clip floats because of surface tension; however, the cork, toy boat, and marble float or sink because of their relationship to a buoyant force. All objects immersed in a liquid experience a buoyant force, which pushes them upward. The strength of this force is equal to the weight of the liquid displaced, or pushed aside, by an object. Every object also experiences a downward force due to gravity, which is measured as the object's weight, and which is directly proportional to the object's mass. When the buoyant force acting on an object is greater than the downward force due to gravity, the object floats. However, when the buoyant force is less than the force due to gravity, the object sinks. Both the cork and the aluminum toy boat are able to displace enough water to create a buoyant force that exceeds the force due to gravity, so they float. However, the glass marble does not displace enough water to create a sufficient buoyant force, so it sinks.
The density of fresh, newly cut wood is less than water, and fresh wood always floats; however, over time, floating pieces of wood may sink. Which of the following explanations would Student 1 most likely give for this observation?
Student 1 says that objects can float due to surface tension, or because they are less dense than water; however, Student 1 also says that floating due to surface tension happens in small objects that are more dense than water. Since this question tells us that fresh wood is less dense than water and always floats, the reason why it floats must be because of the low density of the wood. If a piece of wood then sinks, the density of the wood must have changed to become greater than the density of water.
Student 1 says that objects can float due to surface tension, or because they are less dense than water; however, Student 1 also says that floating due to surface tension happens in small objects that are more dense than water. Since this question tells us that fresh wood is less dense than water and always floats, the reason why it floats must be because of the low density of the wood. If a piece of wood then sinks, the density of the wood must have changed to become greater than the density of water.
Compare your answer with the correct one above
In a physics class, students conducted a series of experiments by placing different objects into a beaker of water. They conducted twenty trials for each object. For each trial, they recorded whether or not the object floated.
First, they placed a steel paper clip into the water. They observed that the paper clip usually sank; however, they also saw that occasionally, the paper clip stayed afloat if it was placed very gently on top of the water. Next, they repeated the the same procedure using a cork, a toy boat made of aluminum, and a glass marble. They observed that both the cork and the toy boat always stayed afloat in the water, but that the glass marble always sank.
Below, three students give their explanations for these observations.
Student 1:
Objects float when they are less dense than the liquid in which they are immersed. For example, when immiscible liquids of varying densities are mixed together in a container, the most dense liquid will sink to the bottom of the container, while the least dense liquid will rise to the top. This same principle applies to solid objects. Because the cork and the aluminum toy boat always float, cork and the aluminum of the boat must be less dense than water. Because the glass marble always sinks, the glass of the marble must be more dense than water.
Objects that are more dense than water can also float due to surface tension. Surface tension occurs because molecules of a liquid are more attracted to each other more than they are to other objects. Molecules on the surface of water are attracted to the molecules around them and below them. This attraction causes a liquid's surface to behave if it were covered by a thin film, which resists penetration by other objects. Therefore, small objects such as paper clips can sometimes float on water when the upward force of water's surface tension exceeds the force of gravity pulling such objects down. Because the paper clips often sink and only float sometimes, we can conclude that they are indeed more dense than water, and that their floating is due to surface tension.
Student 2:
Objects float in two different cases: when they are buoyed by a liquid's surface tension or when their average density is less than that of the liquid in which they are immersed. The average density of cork is less than that of water. This is why the cork floats. In contrast, the density of glass is more than that of water. This is why the glass marble sinks.
However, the densities of aluminum and of steel are greater than that of water. Thus, density cannot be used to explain why the aluminum toy boat and the paper clip float. Both of these objects float because of surface tension. Because the paper clip does not have much mass, the normal upward force created by water's surface tension can be enough to allow it to float. Other objects with greater mass, like the toy boat, employ a particular shape to magnify the force of surface tension. The curved shape of the boat's bottom both stabilizes the boat and increases the amount of the boat's surface area that touches the water, maximizing the force due to surface tension that the boat receives.
Student 3:
In this experiment, the paper clip floats because of surface tension; however, the cork, toy boat, and marble float or sink because of their relationship to a buoyant force. All objects immersed in a liquid experience a buoyant force, which pushes them upward. The strength of this force is equal to the weight of the liquid displaced, or pushed aside, by an object. Every object also experiences a downward force due to gravity, which is measured as the object's weight, and which is directly proportional to the object's mass. When the buoyant force acting on an object is greater than the downward force due to gravity, the object floats. However, when the buoyant force is less than the force due to gravity, the object sinks. Both the cork and the aluminum toy boat are able to displace enough water to create a buoyant force that exceeds the force due to gravity, so they float. However, the glass marble does not displace enough water to create a sufficient buoyant force, so it sinks.
Given that Student 3's explanation is correct, how does the buoyant force on an object held down completely under water compare to the buoyant force on the same object when it is held down partially under water? Compared to the force on the completely-submerged object, the force on the partially-submerged object is __________.
In a physics class, students conducted a series of experiments by placing different objects into a beaker of water. They conducted twenty trials for each object. For each trial, they recorded whether or not the object floated.
First, they placed a steel paper clip into the water. They observed that the paper clip usually sank; however, they also saw that occasionally, the paper clip stayed afloat if it was placed very gently on top of the water. Next, they repeated the the same procedure using a cork, a toy boat made of aluminum, and a glass marble. They observed that both the cork and the toy boat always stayed afloat in the water, but that the glass marble always sank.
Below, three students give their explanations for these observations.
Student 1:
Objects float when they are less dense than the liquid in which they are immersed. For example, when immiscible liquids of varying densities are mixed together in a container, the most dense liquid will sink to the bottom of the container, while the least dense liquid will rise to the top. This same principle applies to solid objects. Because the cork and the aluminum toy boat always float, cork and the aluminum of the boat must be less dense than water. Because the glass marble always sinks, the glass of the marble must be more dense than water.
Objects that are more dense than water can also float due to surface tension. Surface tension occurs because molecules of a liquid are more attracted to each other more than they are to other objects. Molecules on the surface of water are attracted to the molecules around them and below them. This attraction causes a liquid's surface to behave if it were covered by a thin film, which resists penetration by other objects. Therefore, small objects such as paper clips can sometimes float on water when the upward force of water's surface tension exceeds the force of gravity pulling such objects down. Because the paper clips often sink and only float sometimes, we can conclude that they are indeed more dense than water, and that their floating is due to surface tension.
Student 2:
Objects float in two different cases: when they are buoyed by a liquid's surface tension or when their average density is less than that of the liquid in which they are immersed. The average density of cork is less than that of water. This is why the cork floats. In contrast, the density of glass is more than that of water. This is why the glass marble sinks.
However, the densities of aluminum and of steel are greater than that of water. Thus, density cannot be used to explain why the aluminum toy boat and the paper clip float. Both of these objects float because of surface tension. Because the paper clip does not have much mass, the normal upward force created by water's surface tension can be enough to allow it to float. Other objects with greater mass, like the toy boat, employ a particular shape to magnify the force of surface tension. The curved shape of the boat's bottom both stabilizes the boat and increases the amount of the boat's surface area that touches the water, maximizing the force due to surface tension that the boat receives.
Student 3:
In this experiment, the paper clip floats because of surface tension; however, the cork, toy boat, and marble float or sink because of their relationship to a buoyant force. All objects immersed in a liquid experience a buoyant force, which pushes them upward. The strength of this force is equal to the weight of the liquid displaced, or pushed aside, by an object. Every object also experiences a downward force due to gravity, which is measured as the object's weight, and which is directly proportional to the object's mass. When the buoyant force acting on an object is greater than the downward force due to gravity, the object floats. However, when the buoyant force is less than the force due to gravity, the object sinks. Both the cork and the aluminum toy boat are able to displace enough water to create a buoyant force that exceeds the force due to gravity, so they float. However, the glass marble does not displace enough water to create a sufficient buoyant force, so it sinks.
Given that Student 3's explanation is correct, how does the buoyant force on an object held down completely under water compare to the buoyant force on the same object when it is held down partially under water? Compared to the force on the completely-submerged object, the force on the partially-submerged object is __________.
Student 3 says that the buoyant force that an object experiences is equal to the weight of the water that the object displaces. Since an object that's held down completely under water displaces more water than an object that's held down only partially under water, the object that is completely under water experiences a greater buoyant force. This is why it's hard to push an inner tube completely under the water in a pool!
Student 3 says that the buoyant force that an object experiences is equal to the weight of the water that the object displaces. Since an object that's held down completely under water displaces more water than an object that's held down only partially under water, the object that is completely under water experiences a greater buoyant force. This is why it's hard to push an inner tube completely under the water in a pool!
Compare your answer with the correct one above
In a physics class, students conducted a series of experiments by placing different objects into a beaker of water. They conducted twenty trials for each object. For each trial, they recorded whether or not the object floated.
First, they placed a steel paper clip into the water. They observed that the paper clip usually sank; however, they also saw that occasionally, the paper clip stayed afloat if it was placed very gently on top of the water. Next, they repeated the the same procedure using a cork, a toy boat made of aluminum, and a glass marble. They observed that both the cork and the toy boat always stayed afloat in the water, but that the glass marble always sank.
Below, three students give their explanations for these observations.
Student 1:
Objects float when they are less dense than the liquid in which they are immersed. For example, when immiscible liquids of varying densities are mixed together in a container, the most dense liquid will sink to the bottom of the container, while the least dense liquid will rise to the top. This same principle applies to solid objects. Because the cork and the aluminum toy boat always float, cork and the aluminum of the boat must be less dense than water. Because the glass marble always sinks, the glass of the marble must be more dense than water.
Objects that are more dense than water can also float due to surface tension. Surface tension occurs because molecules of a liquid are more attracted to each other more than they are to other objects. Molecules on the surface of water are attracted to the molecules around them and below them. This attraction causes a liquid's surface to behave if it were covered by a thin film, which resists penetration by other objects. Therefore, small objects such as paper clips can sometimes float on water when the upward force of water's surface tension exceeds the force of gravity pulling such objects down. Because the paper clips often sink and only float sometimes, we can conclude that they are indeed more dense than water, and that their floating is due to surface tension.
Student 2:
Objects float in two different cases: when they are buoyed by a liquid's surface tension or when their average density is less than that of the liquid in which they are immersed. The average density of cork is less than that of water. This is why the cork floats. In contrast, the density of glass is more than that of water. This is why the glass marble sinks.
However, the densities of aluminum and of steel are greater than that of water. Thus, density cannot be used to explain why the aluminum toy boat and the paper clip float. Both of these objects float because of surface tension. Because the paper clip does not have much mass, the normal upward force created by water's surface tension can be enough to allow it to float. Other objects with greater mass, like the toy boat, employ a particular shape to magnify the force of surface tension. The curved shape of the boat's bottom both stabilizes the boat and increases the amount of the boat's surface area that touches the water, maximizing the force due to surface tension that the boat receives.
Student 3:
In this experiment, the paper clip floats because of surface tension; however, the cork, toy boat, and marble float or sink because of their relationship to a buoyant force. All objects immersed in a liquid experience a buoyant force, which pushes them upward. The strength of this force is equal to the weight of the liquid displaced, or pushed aside, by an object. Every object also experiences a downward force due to gravity, which is measured as the object's weight, and which is directly proportional to the object's mass. When the buoyant force acting on an object is greater than the downward force due to gravity, the object floats. However, when the buoyant force is less than the force due to gravity, the object sinks. Both the cork and the aluminum toy boat are able to displace enough water to create a buoyant force that exceeds the force due to gravity, so they float. However, the glass marble does not displace enough water to create a sufficient buoyant force, so it sinks.
Paint is more dense than cooking oil; however, when a drop of paint is dripped into a container of cooking oil, it floats on top of the oil. If Student 1's explanation is correct, which of the following is most likely the reason for this observation?
In a physics class, students conducted a series of experiments by placing different objects into a beaker of water. They conducted twenty trials for each object. For each trial, they recorded whether or not the object floated.
First, they placed a steel paper clip into the water. They observed that the paper clip usually sank; however, they also saw that occasionally, the paper clip stayed afloat if it was placed very gently on top of the water. Next, they repeated the the same procedure using a cork, a toy boat made of aluminum, and a glass marble. They observed that both the cork and the toy boat always stayed afloat in the water, but that the glass marble always sank.
Below, three students give their explanations for these observations.
Student 1:
Objects float when they are less dense than the liquid in which they are immersed. For example, when immiscible liquids of varying densities are mixed together in a container, the most dense liquid will sink to the bottom of the container, while the least dense liquid will rise to the top. This same principle applies to solid objects. Because the cork and the aluminum toy boat always float, cork and the aluminum of the boat must be less dense than water. Because the glass marble always sinks, the glass of the marble must be more dense than water.
Objects that are more dense than water can also float due to surface tension. Surface tension occurs because molecules of a liquid are more attracted to each other more than they are to other objects. Molecules on the surface of water are attracted to the molecules around them and below them. This attraction causes a liquid's surface to behave if it were covered by a thin film, which resists penetration by other objects. Therefore, small objects such as paper clips can sometimes float on water when the upward force of water's surface tension exceeds the force of gravity pulling such objects down. Because the paper clips often sink and only float sometimes, we can conclude that they are indeed more dense than water, and that their floating is due to surface tension.
Student 2:
Objects float in two different cases: when they are buoyed by a liquid's surface tension or when their average density is less than that of the liquid in which they are immersed. The average density of cork is less than that of water. This is why the cork floats. In contrast, the density of glass is more than that of water. This is why the glass marble sinks.
However, the densities of aluminum and of steel are greater than that of water. Thus, density cannot be used to explain why the aluminum toy boat and the paper clip float. Both of these objects float because of surface tension. Because the paper clip does not have much mass, the normal upward force created by water's surface tension can be enough to allow it to float. Other objects with greater mass, like the toy boat, employ a particular shape to magnify the force of surface tension. The curved shape of the boat's bottom both stabilizes the boat and increases the amount of the boat's surface area that touches the water, maximizing the force due to surface tension that the boat receives.
Student 3:
In this experiment, the paper clip floats because of surface tension; however, the cork, toy boat, and marble float or sink because of their relationship to a buoyant force. All objects immersed in a liquid experience a buoyant force, which pushes them upward. The strength of this force is equal to the weight of the liquid displaced, or pushed aside, by an object. Every object also experiences a downward force due to gravity, which is measured as the object's weight, and which is directly proportional to the object's mass. When the buoyant force acting on an object is greater than the downward force due to gravity, the object floats. However, when the buoyant force is less than the force due to gravity, the object sinks. Both the cork and the aluminum toy boat are able to displace enough water to create a buoyant force that exceeds the force due to gravity, so they float. However, the glass marble does not displace enough water to create a sufficient buoyant force, so it sinks.
Paint is more dense than cooking oil; however, when a drop of paint is dripped into a container of cooking oil, it floats on top of the oil. If Student 1's explanation is correct, which of the following is most likely the reason for this observation?
Student 1 says that objects may either float because they are less dense than water or because they rest on top of water due to the water's surface tension. Since we know that the drop of paint is more dense than water, it must float because of surface tension. According to Student 1, when something floats due to surface tension, the upward force from surface tension exceeds the downward force that gravity exerts on the drop of paint.
Student 1 says that objects may either float because they are less dense than water or because they rest on top of water due to the water's surface tension. Since we know that the drop of paint is more dense than water, it must float because of surface tension. According to Student 1, when something floats due to surface tension, the upward force from surface tension exceeds the downward force that gravity exerts on the drop of paint.
Compare your answer with the correct one above
In a physics class, students conducted a series of experiments by placing different objects into a beaker of water. They conducted twenty trials for each object. For each trial, they recorded whether or not the object floated.
First, they placed a steel paper clip into the water. They observed that the paper clip usually sank; however, they also saw that occasionally, the paper clip stayed afloat if it was placed very gently on top of the water. Next, they repeated the the same procedure using a cork, a toy boat made of aluminum, and a glass marble. They observed that both the cork and the toy boat always stayed afloat in the water, but that the glass marble always sank.
Below, three students give their explanations for these observations.
Student 1:
Objects float when they are less dense than the liquid in which they are immersed. For example, when immiscible liquids of varying densities are mixed together in a container, the most dense liquid will sink to the bottom of the container, while the least dense liquid will rise to the top. This same principle applies to solid objects. Because the cork and the aluminum toy boat always float, cork and the aluminum of the boat must be less dense than water. Because the glass marble always sinks, the glass of the marble must be more dense than water.
Objects that are more dense than water can also float due to surface tension. Surface tension occurs because molecules of a liquid are more attracted to each other more than they are to other objects. Molecules on the surface of water are attracted to the molecules around them and below them. This attraction causes a liquid's surface to behave if it were covered by a thin film, which resists penetration by other objects. Therefore, small objects such as paper clips can sometimes float on water when the upward force of water's surface tension exceeds the force of gravity pulling such objects down. Because the paper clips often sink and only float sometimes, we can conclude that they are indeed more dense than water, and that their floating is due to surface tension.
Student 2:
Objects float in two different cases: when they are buoyed by a liquid's surface tension or when their average density is less than that of the liquid in which they are immersed. The average density of cork is less than that of water. This is why the cork floats. In contrast, the density of glass is more than that of water. This is why the glass marble sinks.
However, the densities of aluminum and of steel are greater than that of water. Thus, density cannot be used to explain why the aluminum toy boat and the paper clip float. Both of these objects float because of surface tension. Because the paper clip does not have much mass, the normal upward force created by water's surface tension can be enough to allow it to float. Other objects with greater mass, like the toy boat, employ a particular shape to magnify the force of surface tension. The curved shape of the boat's bottom both stabilizes the boat and increases the amount of the boat's surface area that touches the water, maximizing the force due to surface tension that the boat receives.
Student 3:
In this experiment, the paper clip floats because of surface tension; however, the cork, toy boat, and marble float or sink because of their relationship to a buoyant force. All objects immersed in a liquid experience a buoyant force, which pushes them upward. The strength of this force is equal to the weight of the liquid displaced, or pushed aside, by an object. Every object also experiences a downward force due to gravity, which is measured as the object's weight, and which is directly proportional to the object's mass. When the buoyant force acting on an object is greater than the downward force due to gravity, the object floats. However, when the buoyant force is less than the force due to gravity, the object sinks. Both the cork and the aluminum toy boat are able to displace enough water to create a buoyant force that exceeds the force due to gravity, so they float. However, the glass marble does not displace enough water to create a sufficient buoyant force, so it sinks.
Which of the following is mentioned by Student 2, but not by Students 1 or 3, as a factor that determines whether or not objects float?
In a physics class, students conducted a series of experiments by placing different objects into a beaker of water. They conducted twenty trials for each object. For each trial, they recorded whether or not the object floated.
First, they placed a steel paper clip into the water. They observed that the paper clip usually sank; however, they also saw that occasionally, the paper clip stayed afloat if it was placed very gently on top of the water. Next, they repeated the the same procedure using a cork, a toy boat made of aluminum, and a glass marble. They observed that both the cork and the toy boat always stayed afloat in the water, but that the glass marble always sank.
Below, three students give their explanations for these observations.
Student 1:
Objects float when they are less dense than the liquid in which they are immersed. For example, when immiscible liquids of varying densities are mixed together in a container, the most dense liquid will sink to the bottom of the container, while the least dense liquid will rise to the top. This same principle applies to solid objects. Because the cork and the aluminum toy boat always float, cork and the aluminum of the boat must be less dense than water. Because the glass marble always sinks, the glass of the marble must be more dense than water.
Objects that are more dense than water can also float due to surface tension. Surface tension occurs because molecules of a liquid are more attracted to each other more than they are to other objects. Molecules on the surface of water are attracted to the molecules around them and below them. This attraction causes a liquid's surface to behave if it were covered by a thin film, which resists penetration by other objects. Therefore, small objects such as paper clips can sometimes float on water when the upward force of water's surface tension exceeds the force of gravity pulling such objects down. Because the paper clips often sink and only float sometimes, we can conclude that they are indeed more dense than water, and that their floating is due to surface tension.
Student 2:
Objects float in two different cases: when they are buoyed by a liquid's surface tension or when their average density is less than that of the liquid in which they are immersed. The average density of cork is less than that of water. This is why the cork floats. In contrast, the density of glass is more than that of water. This is why the glass marble sinks.
However, the densities of aluminum and of steel are greater than that of water. Thus, density cannot be used to explain why the aluminum toy boat and the paper clip float. Both of these objects float because of surface tension. Because the paper clip does not have much mass, the normal upward force created by water's surface tension can be enough to allow it to float. Other objects with greater mass, like the toy boat, employ a particular shape to magnify the force of surface tension. The curved shape of the boat's bottom both stabilizes the boat and increases the amount of the boat's surface area that touches the water, maximizing the force due to surface tension that the boat receives.
Student 3:
In this experiment, the paper clip floats because of surface tension; however, the cork, toy boat, and marble float or sink because of their relationship to a buoyant force. All objects immersed in a liquid experience a buoyant force, which pushes them upward. The strength of this force is equal to the weight of the liquid displaced, or pushed aside, by an object. Every object also experiences a downward force due to gravity, which is measured as the object's weight, and which is directly proportional to the object's mass. When the buoyant force acting on an object is greater than the downward force due to gravity, the object floats. However, when the buoyant force is less than the force due to gravity, the object sinks. Both the cork and the aluminum toy boat are able to displace enough water to create a buoyant force that exceeds the force due to gravity, so they float. However, the glass marble does not displace enough water to create a sufficient buoyant force, so it sinks.
Which of the following is mentioned by Student 2, but not by Students 1 or 3, as a factor that determines whether or not objects float?
In his explanation, Student 2 says that the aluminum toy boat floats because of its shape. According to Student 2, the shape of the toy boat allows it to maximize the upward forces it experiences due to water's surface tension. Student 1 and Student 2 also mention surface tension, but neither of them mention the particular shape of an object as a factor that affects whether or not the object floats.
In his explanation, Student 2 says that the aluminum toy boat floats because of its shape. According to Student 2, the shape of the toy boat allows it to maximize the upward forces it experiences due to water's surface tension. Student 1 and Student 2 also mention surface tension, but neither of them mention the particular shape of an object as a factor that affects whether or not the object floats.
Compare your answer with the correct one above